Eckart Lupus 141+ Tandempumpfass

Eckart Lupus 141+ tandem pump tank (tank capacity: 14,100 l) with gelcoat finish, green, baffles permanently laminated, wheel cutouts on all wheels, maintenance hatch on top of the tank approx. 600 x 600 mm, 2-line air brake system, ALB automatic, load-dependent brake control via fill level indicator in the front tank floor, hose racks on the left and right, lighting, E4000GLD eccentric screw pump: 4000 l/min, stone trap integrated into the eccentric screw pump with drain cover, suction connection front left Bauer HK 159, cup with quick coupler and vent valve, automatic pneumatic fill shut-off for suction connection HK159, Outlet valve (three-way valve) hydraulically double-acting Bauer HK 133 cup, volume metering device on the three-way valve manually operated, 6.5 m suction line split with suction protection (4.5 m pipe + 2 m hose) Bauer HK 159 - Ball for quick coupler and wide-angle drive shaft on one side with slip clutch; tank capacity: 14,100 l, SLE system for increasing the drawbar load - partition in the tank incl. ventilation of the drawbar load chamber via a slide gate, fill level indicator for both tank chambers, drilled axles as preparation for a tire pressure regulation system incl. mounting brackets on the frame, under-mount K80 ball head - Drawbar load: 3 t, 10 t drawbar winch adjustable with 2 speeds, Tires: BKT 750/60 R 30.5 FL 630, Galvanized fenders, Partial LED lighting, TDASL axle lubrication rail on the axle mount between the tires - lubrication of steering pins and axle shaft, 8 lubrication points on each side of the vehicle routed outward from the axle mount, 6' clog-free slide gate (cast iron) - drum slide gate, 8' suction arm Central - hydraulically operated on both sides (requires manual repositioning of the hydraulic cylinder) incl. flexible funnel with stand, 90° elbow HK cup & vent valve, 8' non-clogging gate valve (cast iron) - Suction arm gate valve, 8' fill shut-off extension for suction gate valve, Bomech Speedy drag shoe distributor 15 m with 2 distribution heads Bomech-Alrena - Hose spacing 25 cm, attachment to drum, I-Control Bomech - E-magnetic control incl. operator terminal, sequential control, circuit breaker compatible, Speedy mounting frame, guide/support wheels for Speedy, T-piece in Speedy feed line with manually operated wedge-flange gate valve and blind cap for use with a baffle head distributor, 25 km/h version for Austria incl. individual approval