Used machines ...
New Holland CR 8.90 + 10,7m SW + SWW IntelliSense
-
-
Questions to this offer?
EUR
374.850
incl. VAT 19%
(315.000 excl. VAT 19%)
Speed: 30 km/h,
Drum / rotor hours: 904,
Engine manufacturer: FPT,
Engine type: Cursor 13,
Width: 349 cm,
Number of engine cylinders: 6,
Autopilot,
Lighting/warning signs,
double blade,
throughput control,
chopper,
horizontal reel adjustment,
two-wheeler,
cab,
performance monitor,
Air suspension seat,
pendulum compensation,
radio,
Left-hand rapeseed knife - hydraulic,
rape cutter right - hydraulic,
reversing device,
rotor,
rotating beacon,
automatic cutterbar guidance (Autocontour...),
height adjustment,
chaff spreader,
loss measurement,
camera / video surveillance,
hectare counter,
drawbar,
tracked / crawler chassis,
GPS system (receiver),
Xenon version working lights,
LED version working lights,
Work lights 6x front,
work lights 6x rear,
Exhaust gas aftertreatment / AdBlue,
Discharge pipe extension,
Electronic threshing unit optimization,
forward motion control,
moisture measurement,
throughput controller,
radial distributor,
SW brake,
electric spreading plate adjustment,
electric sieve adjustment,
variable rotor speed,
sieve box suspension compensation
________
Young used New Holland CR 8.90 including 35ft cutterbar and all-wheel steered trailer
Year of construction 2021
First use 2021
approx. 1400 engine hours
approx. 904 threshing hours
approx. 3230 hectares
Available immediately!
The indicated price includes the current legal VAT.
STANDARD EQUIPMENT
Engine:
. FPT Cursor 13 engine, 6 cylinders
. Stage 5 emission standard
. Turbocharger, intercooler
. Common rail injection
. Rated output 365 kW/496 hp at 2100 rpm .
. Max. Output 400 kW/544 hp at 2000 rpm .
. Fuel tank 1,300 l
. AdBlue tank 160 l
. Electronic control
Traction drive and axles :
. SmartTrax crawler tracks
Planetary axle drives
. Hydrostatic travel drive, 2-speed transmission with electric gear preselection, overload protection, parking brake
. Electrohydraulic differential lock
. 30 km/h at reduced engine speed
Inclined conveyor :
. Automatic ground pressure control and cutting height control of the cutting unit
. Tilt and angle adjustment of the cutting unit
. AutoFloat system
Feed :
. DFR inclined conveyor with mechanical inclination and angle adjustment of the cutting unit
. DFR drive belt for reduced speed
. Twin pitch rotors
Threshing and separation :
. 2 longitudinal rotors, rotating in opposite directions for threshing
and separating
. Rotor length 2.64 m
. Total threshing and separating area 3.06 m²
Cleaning :
. OptiClean cleaning system
. Electrically adjustable lamella screens, total screen area 6.50 m²
. Two separate final threshers, electr. monitoring
. Automatic slope compensation up to 17% of preparation floor, cleaning fan and sieve box
Grain elevator and grain tank :
. Grain tank volume 14,500 l
. Discharge rate 142 l/s
Straw and chaff distribution :
. 6-row straw chopper and hydr. driven chaff spreader
chaff spreader, tool-free change from straw placement to chopping mode
. active straw distribution OptiSpread Plus
Driver's seat :
. Deluxe air suspension seat
. Automatic climate control
. Bluetooth radio
. Refrigerator with adjustable temperature
. Automatic fruit setting (ACS)
. Freely adjustable, color IntelliView IV touch screen monitor
. 24 l hand wash tank under the access ladder
. Rear view camera
SPECIAL EQUIPMENT:
COMFORT PACKAGE
. Air compressor
. Hose and compressed air gun
. Sunrollo package
. LED lighting package
VEHICLE
. Drive axle with differential lock
AUTOMATIC COMBINE HARVESTER ADJUSTMENT INTELLISENSE
. Grain elevator with GrainCam preparation
. Automatic throughput control IntelliCruise
. Moisture and yield measurement
. automatic combine harvester adjustment IntelliSense
. electrically adjustable pre-sieve from the cab
. electrically adjustable rotor cover
PRECISION FARMING
. NavController bracket
. GPS mounting kit
OTHER
. controllable outlet pipe end piece
. Engine blow-off kit
. Automatic steering preparation
New Holland Varifeed 10.70 m cutterbar
Demonstration cutterbar - approx. 100ha run
short stalk dividers plugged
Ear lifter
rapeseed equipment cpl. for SW Heavy Duty
TAM cutterbar wagon Leguan Quattro 35 FT
- 25 km/h
- transport box
- all-wheel steered
- Overrun brake
Optionally, a MacDon FD 235, which was used as a demonstration machine, could also be purchased!
Contact person
Philipp Herold
The information in the description and the pictures
are without guarantee and no liability is assumed for
typing and transmission errors.
Viewing is possible by telephone arrangement.
Errors, changes and prior sale reserved.
Drum / rotor hours: 904,
Engine manufacturer: FPT,
Engine type: Cursor 13,
Width: 349 cm,
Number of engine cylinders: 6,
Autopilot,
Lighting/warning signs,
double blade,
throughput control,
chopper,
horizontal reel adjustment,
two-wheeler,
cab,
performance monitor,
Air suspension seat,
pendulum compensation,
radio,
Left-hand rapeseed knife - hydraulic,
rape cutter right - hydraulic,
reversing device,
rotor,
rotating beacon,
automatic cutterbar guidance (Autocontour...),
height adjustment,
chaff spreader,
loss measurement,
camera / video surveillance,
hectare counter,
drawbar,
tracked / crawler chassis,
GPS system (receiver),
Xenon version working lights,
LED version working lights,
Work lights 6x front,
work lights 6x rear,
Exhaust gas aftertreatment / AdBlue,
Discharge pipe extension,
Electronic threshing unit optimization,
forward motion control,
moisture measurement,
throughput controller,
radial distributor,
SW brake,
electric spreading plate adjustment,
electric sieve adjustment,
variable rotor speed,
sieve box suspension compensation
________
Young used New Holland CR 8.90 including 35ft cutterbar and all-wheel steered trailer
Year of construction 2021
First use 2021
approx. 1400 engine hours
approx. 904 threshing hours
approx. 3230 hectares
Available immediately!
The indicated price includes the current legal VAT.
STANDARD EQUIPMENT
Engine:
. FPT Cursor 13 engine, 6 cylinders
. Stage 5 emission standard
. Turbocharger, intercooler
. Common rail injection
. Rated output 365 kW/496 hp at 2100 rpm .
. Max. Output 400 kW/544 hp at 2000 rpm .
. Fuel tank 1,300 l
. AdBlue tank 160 l
. Electronic control
Traction drive and axles :
. SmartTrax crawler tracks
Planetary axle drives
. Hydrostatic travel drive, 2-speed transmission with electric gear preselection, overload protection, parking brake
. Electrohydraulic differential lock
. 30 km/h at reduced engine speed
Inclined conveyor :
. Automatic ground pressure control and cutting height control of the cutting unit
. Tilt and angle adjustment of the cutting unit
. AutoFloat system
Feed :
. DFR inclined conveyor with mechanical inclination and angle adjustment of the cutting unit
. DFR drive belt for reduced speed
. Twin pitch rotors
Threshing and separation :
. 2 longitudinal rotors, rotating in opposite directions for threshing
and separating
. Rotor length 2.64 m
. Total threshing and separating area 3.06 m²
Cleaning :
. OptiClean cleaning system
. Electrically adjustable lamella screens, total screen area 6.50 m²
. Two separate final threshers, electr. monitoring
. Automatic slope compensation up to 17% of preparation floor, cleaning fan and sieve box
Grain elevator and grain tank :
. Grain tank volume 14,500 l
. Discharge rate 142 l/s
Straw and chaff distribution :
. 6-row straw chopper and hydr. driven chaff spreader
chaff spreader, tool-free change from straw placement to chopping mode
. active straw distribution OptiSpread Plus
Driver's seat :
. Deluxe air suspension seat
. Automatic climate control
. Bluetooth radio
. Refrigerator with adjustable temperature
. Automatic fruit setting (ACS)
. Freely adjustable, color IntelliView IV touch screen monitor
. 24 l hand wash tank under the access ladder
. Rear view camera
SPECIAL EQUIPMENT:
COMFORT PACKAGE
. Air compressor
. Hose and compressed air gun
. Sunrollo package
. LED lighting package
VEHICLE
. Drive axle with differential lock
AUTOMATIC COMBINE HARVESTER ADJUSTMENT INTELLISENSE
. Grain elevator with GrainCam preparation
. Automatic throughput control IntelliCruise
. Moisture and yield measurement
. automatic combine harvester adjustment IntelliSense
. electrically adjustable pre-sieve from the cab
. electrically adjustable rotor cover
PRECISION FARMING
. NavController bracket
. GPS mounting kit
OTHER
. controllable outlet pipe end piece
. Engine blow-off kit
. Automatic steering preparation
New Holland Varifeed 10.70 m cutterbar
Demonstration cutterbar - approx. 100ha run
short stalk dividers plugged
Ear lifter
rapeseed equipment cpl. for SW Heavy Duty
TAM cutterbar wagon Leguan Quattro 35 FT
- 25 km/h
- transport box
- all-wheel steered
- Overrun brake
Optionally, a MacDon FD 235, which was used as a demonstration machine, could also be purchased!
Contact person
Philipp Herold
The information in the description and the pictures
are without guarantee and no liability is assumed for
typing and transmission errors.
Viewing is possible by telephone arrangement.
Errors, changes and prior sale reserved.
Geschwindigkeit: 30 km/h,
Trommel- / Rotorstunden: 904,
Motorhersteller: FPT,
Motortyp: Cursor 13,
Breite: 349 cm,
Motor-Zylinderanzahl: 6,
Autopilot,
Beleuchtung/Warntafeln,
Doppelmesser,
Durchsatzkontrolle,
Häcksler,
Haspelhorizontalverstellung,
Zweirad,
Kabine,
Leistungsmonitor,
Luftgefederter Sitz,
Pendelausgleich,
Radio,
Rapstrennmesser links - hydraulisch,
Rapstrennmesser rechts - hydraulisch,
Reversiereinrichtung,
Rotor,
Rundumleuchte,
automatische Schneidwerksführung (Autocontour...),
Höhenverstellung,
Spreuverteiler,
Verlustmessung,
Kamera / Videoüberwachung,
Hektarzähler,
Zugmaul,
Ketten- / Raupenfahrwerk,
GPS System (Empfänger),
Arbeitsscheinwerfer Xenon Ausführung,
Arbeitsscheinwerfer LED Ausführung,
Arbeitsscheinwerfer 6x vorn,
Arbeitsscheinwerfer 6x hinten,
Abgasnachbehandlung / AdBlue,
Entleerrohrverlängerung,
elektronische Dreschwerkoptimierung,
Vorfahrtregelung,
Feuchtemessung,
Durchsatzregler,
Radialverteiler,
SW-Bremse,
elektische Streublechverstellung,
elektrische Siebverstellung,
variable Rotordrehzahl,
Siebkastenhangausgleich
________
Junger gebrauchter New Holland CR 8.90 inklusive 35ft Schneidwerk und allradgelenktem Wagen
Baujahr 2021
Ersteinsatz 2021
ca. 1400 Motorstunden
ca. 904 Dreschstunden
ca. 3230 Hektar
Sofort Verfügbar!
Der angegebene Preis beinhaltet die aktuelle Gesetzliche MwSt.
SERIENAUSSTATTUNG
Motor:
. FPT Cursor 13 Motor, 6 Zylinder
. Abgasnorm Stufe 5
. Turbolader, Ladeluftkühler
. Common-Rail Einspritzung
. Nennleistung 365 kW/496 PS bei 2100 U/min.
. Max. Leistung 400 kW/544 PS bei 2000 U/min.
. Kraftstofftank 1.300 l
. AdBlue Tank 160 l
. Elektronische Regelung
Fahrantrieb und Achsen:
. SmartTrax Raupenlaufwerk
Planetenachsantrieben
. Hydrostatischer Fahrantrieb, 2-Gang Getriebe mit elektrischer Gangvorwahl, Überlastsicherung, Parkbremse
. Elektrohydraulische Differenzialsperre
. 30 km/h bei reduzierter Motordrehzahl
Schrägförderer:
. Automatische Auflagedruckregelung und Schnitthöhenführung des Schneidwerks
. Neigungs- und Winkelverstellung des Schneidwerks
. AutoFloat System
Zuführung:
. DFR Schrägförderer mit mechanischer Neigungs und Winkelverstellung des Schneidwerks
. Antriebsriemen DFR für reduzierte Drehzahl
. Twin Pitch Rotoren
Drusch und Abscheidung:
. 2 Längsrotoren, gegenläufig drehend zum Dreschen
und Abscheiden
. Rotorlänge 2,64 m
. Gesamte Drusch- und Abscheidefläche 3,06 m²
Reinigung:
. Reinigungssystem OptiClean
. Elektrisch einstellbare Lamellensiebe, Gesamtsiebfläche 6,50 m²
. Zwei separate Nachdrescher, elektr. Überwachung
. Automatischer Hangausgleich bis 17% von Vorbereitungsboden, Reinigungsgebläse u. Siebkasten
Körnerelevator und Korntank:
. Korntankvolumen 14.500 l
. Abtankgeschwindigkeit 142 l/s
Stroh- und Spreuverteilung:
. 6-reihiger Strohhäcksler und hydr. angetriebener
Spreuverteiler, Werkzeugloser Wechsel von Strohablage zu Häckselbetrieb
. aktive Strohverteilung OptiSpread Plus
Fahrerplatz:
. Luftgefederter Sitz Deluxe
. Klimaautomatik
. Bluetooth Radio
. Kühlschrank mit einstellbarer Temperatur
. Automatische Fruchtarteneinstellung (ACS)
. Frei einstellbarer, farbiger IntelliView IV Touch Screen Monitor
. 24 l Handwaschbehälter unter der Aufstiegsleiter
. Rückfahrkamera
SONDERAUSSTATTUNG:
KOMFORTPAKET
. Luftkompressor
. Schlauch und Druckluftpistole
. Sonnenrollopaket
. LED-Beleuchtungspaket
FAHRWERK
. Antriebsachse mit Differentialsperre
AUTOMATISCHE MÄHDRESCHEREINSTELLUNG INTELLISENSE
. Körnerelevator mit GrainCam Vorbereitung
. Automatische Durchsatzregelung IntelliCruise
. Feuchte- und Ertragsmessung
. automatische Mähdreschereinstellung IntelliSense
. elektrisch verstellbares Vorsieb aus der Kabine
. elektrisch verstellbare Rotorabdeckung
PRECISION FARMING
. Halterung NavController
. Befestigungskit GPS
SONSTIGES
. steuerbares Auslaufrohrendstück
. Motorabblaskit
. Lenkautomatik Vorbereitung
New Holland Schneidwerk Varifeed 10,70 m
Vorführschneidwerk - ca. 100ha gelaufen
kurze Halmteiler gesteckt
Ährenheber
Rapsausrüstung kpl. für SW Heavy Duty
TAM Schneidwerkswagen Leguan Quattro 35 FT
- 25 km/h
- Transportbox
- allradgelenkt
- Auflaufbremse
Optional wäre auch eine MacDon FD 235 welches als Vorführmaschine zum Einsatz kam, erwerblich!
Ansprechpartner
Philipp Herold
Die Angaben in der Beschreibung und die Bilder
sind ohne Gewähr und es wird keine Haftung für
Schreib- und Übermittlungsfehler übernommen.
Eine Besichtigung ist nach telefonischer Absprache möglich.
Irrtümer, Änderungen und Zwischenverkauf vorbehalten.
Internal ID: 90732-263400610507 Show original
The used combine harvester New Holland CR 8.90 + 10,7m SW + SWW IntelliSense (new if there is the mark “N” or “New machine”) is for sale at Landwirt.com!
This combine harvester has the power of 544 hp (400 kW) HP (Horse Power).
It has the construction year of 2021.
The used combine harvester New Holland CR 8.90 + 10,7m SW + SWW IntelliSense has been in work 1400 working hours.
This combine harvester has the width of 1070 cm.
The used combine harvester New Holland CR 8.90 + 10,7m SW + SWW IntelliSense is for sale at the price of 374.850 EUR incl. VAT 19% (if abroad: plus transport, forwarding and customs fees).
This combine harvester New Holland CR 8.90 + 10,7m SW + SWW IntelliSense has following equipment: Cutting unit carriage, Air conditioner, Board computer, Yield measurement - GPS, Cutting unit (mechanism), Drive Hydrostatic drive
Used machine
Type:
CR 8.90 + 10,7m SW + SWW IntelliSense
hp:
544 hp / 400 kW
Working width:
1070 cm
Working hours:
1400 h
Year of construction:
2021
Front tire specifications
Raupe
Rear tire specifications
500/85 R24
Front tire tread depth (%)
70
Rear tire tread depth (%)
70
PDF specifications
Add to favourits
Cutting unit carriage
Air conditioner
Board computer
Yield measurement - GPS
Cutting unit (mechanism)
Drive: Hydrostatic drive
Different machine location
DE - 99880 - Mechterstädt
Philipp Herold
TAM Thüringer Agrartechnik & Maschinenbau GmbH
Birnweg 2
99976 - Anrode/OT Lengefeld
99976 - Anrode/OT Lengefeld
More offers from this category
