Merlo TF 27.6 27.6 TOP 27.6 Plus 40km/h
EUR
81.675
vklj. 21 % DDV
(67.500 brez 21 % DDV)
For sale!
Merlo TF27.6
Very compact machine with a height of 1960 mm
- Performing multiple movements simultaneously is even easier thanks to the FLOW SHARING hydraulic system. The P27.6 TOP and P27.6 PLUS do not have this!
- More powerful hydrostatic system
- More comprehensive internal equipment
75 HP Kohler KDI2504 Engine
The transmission is based on
the components of the TOP model (oversized
150 cm³ hydrostatic motor for
greater torque. This is electronically controlled via UCTI
: EPD.
Pump: gear pump with a maximum flow rate
of 95 l/min and maximum pressure of 210 bar.
Distribution block: New distribution block with FlowSharing control and valves for step-by-step drive of the engine.
The new TF27.6 is equipped with the ASCS
(Adaptive Stability Control System)
The system is based on the UGS and operates
as with the TF models, with automatic
recognition of the attached accessory,
reading of the lifted load, and the position of
the fork carriage.
Compared to the P27.6, the TF27.6 features:
• Magnetostrictive sensor in the extension cylinder
• Angle sensor for the boom
• Attachment detection
• Load table in the lift cylinder
The capacitive joystick with
reverse switch and second
hydraulic function are included
as standard.
Additional hydraulics
Merlo TF27.6
Very compact machine with a height of 1960 mm
- Performing multiple movements simultaneously is even easier thanks to the FLOW SHARING hydraulic system. The P27.6 TOP and P27.6 PLUS do not have this!
- More powerful hydrostatic system
- More comprehensive internal equipment
75 HP Kohler KDI2504 Engine
The transmission is based on
the components of the TOP model (oversized
150 cm³ hydrostatic motor for
greater torque. This is electronically controlled via UCTI
: EPD.
Pump: gear pump with a maximum flow rate
of 95 l/min and maximum pressure of 210 bar.
Distribution block: New distribution block with FlowSharing control and valves for step-by-step drive of the engine.
The new TF27.6 is equipped with the ASCS
(Adaptive Stability Control System)
The system is based on the UGS and operates
as with the TF models, with automatic
recognition of the attached accessory,
reading of the lifted load, and the position of
the fork carriage.
Compared to the P27.6, the TF27.6 features:
• Magnetostrictive sensor in the extension cylinder
• Angle sensor for the boom
• Attachment detection
• Load table in the lift cylinder
The capacitive joystick with
reverse switch and second
hydraulic function are included
as standard.
Additional hydraulics
Prevedi opis
Prikaži original
rabljeni stroji
tip:
TF 27.6 | 27.6 TOP | 27.6 Plus | 40km/h
KM:
75 KM / 56 kW
delovne ure:
7 h
letnik:
2025
PDF podatkovni list
Shrani v seznam za pomnenje
Sales Department
Prikaži telefonsko številko
Prikaži telefonsko številko
G.J. van Gurp B.V.
Boerhaar 9.
8131 S - Wijhe
8131 S - Wijhe
Nadaljnji oglasi iz te kategorije
